Setting up and using the accessibility features
Enabling Magnification mode
1
From the control panel, press and hold the
5
key until you hear a voice message.
2
Select
Magnification mode
.
3
Select
OK
.
For more information on navigating a magnified screen, see
“Navigating the screen using gestures” on
.
Activating Voice Guidance
From the control panel
1
Press and hold the
5
key until you hear a voice message.
2
Select
OK
.
From the keyboard
1
Press and hold the
5
key until you hear a voice message.
2
Press
Tab
to navigate the focus cursor to the OK button, and then press
Enter
.
Notes:
•
Voice Guidance is also activated when you insert headphones into the headphone jack.
•
To adjust the volume, use the volume buttons at the bottom part of the control panel.
Adjusting the Voice Guidance speech rate
1
From the home screen, select
Settings
>
Device
>
Accessibility
>
Speech Rate
.
2
Select the speech rate.
Enabling spoken passwords or personal identification
numbers
1
From the home screen, select
Settings
>
Device
>
Accessibility
>
Speak Passwords/PINs
.
2
Enable the setting.
Setting up and using the accessibility features
26
Summary of Contents for XC8155
