Lexmark XC8155 User Manual Download Page 233 | Manualshive

Page: 233 / 317

background image

Region

Numeric code

Invalid region

9

Note:

To ﬁnd the region settings of the printer and toner cartridge, print the print quality test pages.

From the control panel, navigate to:

Settings

>

Troubleshooting

>

Print Quality Test Pages

.

Non

‑

Lexmark supply

The printer has detected a non

‑

Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.

Warning—Potential Damage:

Use of third-party supplies or parts can affect warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, from the control panel, press and hold

X

and

#

simultaneously for 15 seconds.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part. For more information, see

“Using genuine Lexmark parts and

supplies” on page 161

If the printer does not print after pressing and holding

X

and

#

simultaneously for 15 seconds, then reset

the supply usage counter.

1

From the control panel, navigate to:

Settings

>

Device

>

Maintenance

>

Conﬁguration Menu

>

Supply Usage And Counters

2

Select the part or supply that you want to reset, and then select

Start

.

3

Read the warning message, and then select

Continue

.

4

Press and hold

X

and

#

simultaneously for 15 seconds to clear the message.

Note:

If you are unable to reset the supply usage counters, then return the item to the place of

purchase.

Scanner maintenance required, use ADF Kit

The printer is scheduled for maintenance. For more information, go to

http://support.lexmark.com

contact your service representative, and then report the message.

Troubleshooting

233

«
...
231
232
233
234
235
...
»

Summary of Contents for XC8155






























































































































































































































































































































Reviews:

No comments

Related manuals for XC8155

Brand: Xerox Pages: 48

Brand: Oce Pages: 4

Brand: DataCard Pages: 2

Brand: GCC Technologies Pages: 63

Brand: GCC Technologies Pages: 9

Brand: GCC Technologies Pages: 199

Brand: Xerox Pages: 4

Brand: Lexmark Pages: 455

Brand: Oki Pages: 147

Brand: Oki Pages: 12

Brand: Oki Pages: 297

Brand: Oki Pages: 111

Brand: Oki Pages: 6

Brand: Oki Pages: 2

Brand: Oki Pages: 108

C5800Ldn Series

Brand: Oki Pages: 266

C5800Ldn Series

Brand: Oki Pages: 276

Brand: Oki Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands