Lexmark XC6152, User Manual

Page: 50 / 301

Faxing
Setting up the printer to fax
Notes:
•
The following connection methods are applicable only in some countries or regions.
•
During the initial printer setup, clear the fax function check box and any other function you plan to set up
later, and then touch
Continue .
•
The indicator light may blink red if the fax function is enabled and not fully set up.
Warning—Potential Damage: Do not touch cables or the printer in the area shown while actively sending or
receiving a fax.
Configuring the SMTP server for fax
From the control panel
1
From the control panel, touch Settings > Fax > Fax Server Setup > Fax Server E
‑
mail Settings .
2
Configure the settings.
Note: To use the SMTP server setting for e
‑
mail, enable Use E
‑
mail SMTP Server .
From the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Faxing 50