Lexmark XC6152 User Manual Download Page 48

Page: 48 / 301

E-mailing

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)

Scanner glass

•

Use the ADF for multiple

‑

page or two-sided

documents.

•

Load an original document faceup. For multiple

‑

page

documents, make sure to align the leading edge
before loading.

•

Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

•

Use the scanner glass for single

‑

page documents,

book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).

•

Place the document facedown in the corner with the
arrow.

Conﬁguring the SMTP server for e

‑

mail

From the control panel

From the control panel, touch

Settings

‑

mail

‑

mail Setup

Conﬁgure the settings.

From the Embedded Web Server

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

‑

mail

From the E

‑

mail Setup section, conﬁgure the settings.

Click

Save

E-mailing

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands