Lexmark XC6152 User Manual Download Page 45

Page: 45 / 301

Copying

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)

Scanner glass

•

Use the ADF for multiple

‑

page or two-sided

documents.

•

Load an original document faceup. For multiple

‑

page

documents, make sure to align the leading edge
before loading.

•

Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

•

Use the scanner glass for single

‑

page documents,

book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).

•

Place the document facedown in the corner with the
arrow.

Making copies

Load an original document into the ADF tray or on the scanner glass.

Note:

To avoid a cropped image, make sure that the original document and output have the same paper

size.

From the home screen, touch

Copy

, and then specify the number of copies.

If necessary, adjust the copy settings.

Copy the document.

Note:

To make a quick copy, from the control panel, press

Copying photos

Place a photo on the scanner glass.

From the home screen, touch

Copy

Content

Content Type

Photo

Touch

Content Source

, and then select the setting that best matches the original photo.

Copy the photo.

Copying

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands