Lexmark XC6152 User Manual Download Page 40

Page: 40 / 301

Printing from a mobile device using Wi

‑

Fi Direct®

‑

Fi Direct

is a printing service that lets you print to any Wi

‑

Fi Direct

‑

ready printer.

Note:

Make sure that the mobile device is connected to the printer wireless network. For more information,

see

“Connecting a mobile device to the printer” on page 157

From your mobile device, launch a compatible application or select a document from your ﬁle manager.

Depending on your mobile device, do one of the following:

•

Tap

Print

•

Tap

Print

•

Tap

Print

Select a printer, and then adjust the settings, if necessary.

Print the document.

Printing from a ﬂash drive

Insert the ﬂash drive.

Notes:

•

If you insert the ﬂash drive when an error message appears, then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

From the display, touch the document that you want to print.

If necessary, conﬁgure other print settings.

Send the print job.

To print another document, touch

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Printing

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands