Lexmark XC6152 User Manual Download Page 238

Page: 238 / 301

Action

Yes

Step 2

Perform Color Adjust.

From the home screen, touch

Settings

Print

Quality

Advanced Imaging

Color Adjust

Print the document.

Does gray or colored background appear on prints?

Go to step 3.

The problem is
solved.

Step 3

Remove, and then insert the imaging unit.

Warning—Potential Damage:

Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.

Print the document.

Does gray or colored background appear on prints?

Contact

customer

support

The problem is
solved.

Incorrect margins

Action

Yes

Step 1

Adjust the paper guides to the correct position for the paper
loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 2.

Step 2

Set the paper size.

From the control panel, navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 3.

Troubleshooting

238

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands