Lexmark XC6152 User Manual Download Page 226

Page: 226 / 301

Paper curl

Action

Yes

Step 1

Adjust the guides in the tray to the correct position for the paper
loaded.

Print the document.

Is the paper curled?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the paper curled?

Go to step 3.

The problem is
solved.

Step 3

Print on the other side of the paper.

Remove paper, ﬂip it over, and then reload paper.

Print the document.

Is the paper curled?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the paper curled?

Contact

customer

support

The problem is
solved.

Troubleshooting

226

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Lexmark XC6152, User Manual, Page: 226 / 301

Search results

Summary of Contents for XC6152

Reviews: