Lexmark XC6152 User Manual Download Page 201 | Manualshive

Page: 201 / 301

background image

CAUTION—POTENTIAL INJURY:

When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•

Make sure that all doors and trays are closed.

•

Turn off the printer, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer.

•

If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.

•

If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in ﬂooring.

•

If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove
the output options and lift the printer off the trays. Do not try to lift the printer and any options at the same
time.

•

Always use the handholds on the printer to lift it.

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•

Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.

•

Keep the printer in an upright position.

•

Avoid severe jarring movements.

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to

http://support.lexmark.com

or contact customer support.

Saving energy and paper

Conﬁguring the power save mode settings

Sleep mode

1

From the home screen, touch

Settings

>

Device

>

Power Management

>

Timeouts

>

Sleep Mode

.

2

Specify the amount of time that the printer stays idle before it enters Sleep Mode.

Hibernate mode

1

From the home screen, touch

Settings

>

Device

>

Power Management

>

Timeouts

>

Hibernate Timeout

.

2

Select the amount of time that the printer stays idle before it enters Hibernate mode.

Notes:

•

For Hibernate Timeout to work, set Hibernate Timeout on Connection to Hibernate.

•

The Embedded Web Server is disabled when the printer is in Hibernate mode.

Maintaining the printer

201

«
...
199
200
201
202
203
...
»

Summary of Contents for XC6152














































































































































































































































































































Reviews:

No comments

Related manuals for XC6152

Brand: Oki Pages: 33

Brand: Oki Pages: 52

Brand: Oki Pages: 11

Brand: OKIDATA Pages: 58

Brand: Xerox Pages: 25

Brand: TallyGenicom Pages: 310

Brand: TallyGenicom Pages: 330

Brand: OEC Pages: 28

Brand: Partex Pages: 12

Brand: Citizen Pages: 57

Brand: Ricoh Pages: 269

Brand: Ricoh Pages: 284

Brand: Code Soft Pages: 101

Brand: Lexmark Pages: 3

CardJet X001200

Brand: FARGO electronics Pages: 52

Brand: WAGO Pages: 52

Brand: Citizen Pages: 52

Brand: Citizen Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands