Lexmark XC6152 User Manual Download Page 155

Page: 155 / 301

Maintaining the printer

Warning—Potential Damage:

Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Setting up e

‑

mail alerts

Conﬁgure the printer to send e

‑

mail alerts when supplies are low, when paper must be changed or added, or

when there is a paper jam.

Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•

View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.

•

If you are using a proxy server, then temporarily disable it to load the web page correctly.

Click

Settings

Device

Notiﬁcations

‑

mail Alert Setup

, and then conﬁgure the settings.

Click

Setup E-mail Lists and Alerts

, and then conﬁgure the settings.

Apply the changes.

Note:

For more information on SMTP server settings, contact your e

‑

mail provider.

Viewing reports

From the home screen, touch

Settings

Reports

Select the report that you want to view.

Adjusting the speaker volume

Adjusting the default internal speaker volume

From the control panel, navigate to:

Settings

Device

Preferences

Audio Feedback

Adjust the volume.

Notes:

•

If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.

•

The volume resets to the default value after the session is logged out or when the printer wakes from
Sleep or Hibernate mode.

Maintaining the printer

155

Summary of Contents for XC6152














































































































































































































































































































Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands

Lexmark XC6152, User Manual

Search results

Summary of Contents for XC6152

Reviews:

Related manuals for XC6152

Brands by name

Popular brands