Lexmark XC6100 Series User Manual Download

Page: 56 / 177

Changing port settings after installing an internal solutions port

Notes:

•

If the printer has a static IP address, then do not change the conﬁguration.

•

If the computers are conﬁgured to use the network name instead of an IP address, then do not change
the conﬁguration.

•

If you are adding a wireless internal solutions port (ISP) to a printer previously conﬁgured for an Ethernet
connection, then disconnect the printer from the Ethernet network.

For Windows users

Open the printers folder.

From the shortcut menu of the printer with the new ISP, open the printer properties.

Conﬁgure the port from the list.

Update the IP address.

Apply the changes.

For Macintosh users

From System Preferences in the Apple menu, navigate to the list of printers, and then select

Type the IP address in the address ﬁeld.

Apply the changes.

Setting up serial printing (Windows only)

Set the parameters in the printer.

From the control panel, navigate to the menu for the port settings.

Locate the menu for the serial port settings, and then adjust the settings, if necessary.

Apply the changes.

From your computer, open the printers folder, and then select your printer.

Open the printer properties, and then select the COM port from the list.

Set the COM port parameters in Device Manager.

Notes:

•

Serial printing reduces printing speed.

•

Make sure that the serial cable is connected to the serial port on your printer.

Maintaining the printer

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands