Lexmark XC6100 Series, User Manual

Page: 30 / 177

Copying
Making copies
1
Load an original document into the ADF tray or on the scanner glass.
Notes:
•
To avoid a cropped image, make sure that the size of the original document and output is the same.
•
To make a quick copy, from the control panel, press .
2
From the home screen, touch Copy , and then specify the size of the original document.
Note: If the document is a mix of different sizes, then select Mixed Letter/Legal .
3
If necessary, specify a tray or feeder and a different output size.
4
Send the copy job.
Copying photos
1
Place a photo on the scanner glass.
2
From the home screen, touch Copy > Content > Photo .
3
From the Content Source menu, select the setting that best matches the original photo.
4
Send the copy job.
Copying on letterhead
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy , and then specify the size of the original document.
3
Touch Copy to , and then select the tray that contains the specialty media.
If you are loading the specialty media into the multipurpose feeder, then navigate to:
Multipurpose Feeder > select the size of the specialty media > Letterhead
4
Send the copy job.
Copying on both sides of the paper (two
‑
sided)
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Paper Setup .
3
Adjust the settings.
4
Send the copy job.
Copying 30