Lexmark XC6100 Series User Manual Download

Page: 28 / 177

Images:

•

.dcx

•

.gif

•

.jpeg or .jpg

•

.bmp

•

.pcx

•

.tiff or .tif

•

.png

Conﬁguring conﬁdential jobs

From the home screen, touch

Settings

Security

Conﬁdential Print Setup

Conﬁgure the settings.

Use

Max Invalid PIN

Limit the number of times an invalid PIN can be entered.

Note:

When the limit is reached, the print jobs for that user name are deleted.

Conﬁdential Job
Expiration

Set the amount of time before conﬁdential jobs are automatically deleted from the printer
memory.

Note:

Conﬁdential held jobs are stored in the printer until you log in and release or

delete them manually.

Repeat Job
Expiration

Set the amount of time before repeat jobs are deleted from the printer memory.

Note:

Repeat held jobs are stored so extra copies can be printed later.

Verify Job Expiration Set the amount of time before verify jobs are deleted from the printer memory.

Note:

Verify jobs print one copy to check if it is satisfactory before printing the

remaining copies.

Reserve Job
Expiration

Set the amount of time before reserved jobs are deleted without being printed.

Note:

Reserve held jobs are automatically deleted after printing.

Printing held jobs

With a document open, select

File

Print

Select the printer, and then do the following:

•

For Windows users, click

Properties

Preferences

, and then click

Print and Hold

•

For Macintosh users, select

Print and Hold

Select the print job type.

If necessary, assign a user name.

Send the print job.

From the printer home screen, touch

Held Jobs

Send the print job.

Printing

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands