Lexmark XC6100 Series User Manual Download

Page: 148 / 177

Action

Yes

Step 2

Check the ﬁle you want to scan.

Make sure that the ﬁle name is not already used in the
destination folder.

Make sure that the document or photo you want to scan is not
open in another application.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Go to step 3.

Step 3

Make sure that the

Append time stamp

or the

Overwrite

existing ﬁle

check box is selected in the destination

conﬁguration settings.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Contact

customer

support

Scanner does not close

Action

Yes

Remove obstructions that keep the scanner unit open.

Did the scanner unit close correctly?

The problem is
solved.

Contact

customer

support

Scanning takes too long or freezes the computer

Action

Yes

Step 1

Close all applications that are interfering with the scan.

Does scanning take too long or freeze the computer?

Go to step 2.

The problem is
solved.

Step 2

Select a lower scan resolution.

From the home screen, touch

Scan To

Scan Settings

Adjust the resolution.

Does scanning take too long or freeze the computer?

Contact

customer

support

The problem is
solved.

Troubleshooting

148

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands