Lexmark XC6100 Series User Manual Download

Page: 124 / 177

Print quality is poor

Blank or white pages

Action

Yes

Step 1

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Is the printer still printing blank or white pages?

Go to step 2.

The problem is
solved.

Step 2

Replace the imaging unit or imaging kit, and then resend the print
job.

Is the printer still printing blank or white pages?

Contact

customer

support

The problem is
solved.

Dark print

Troubleshooting

124

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands