Lexmark XC6100 Series User Manual Download

Page: 12 / 177

Control panel

Standard bin

Automatic document feeder (ADF)

Staple ﬁnisher

Standard 550

‑

sheet tray

Optional 550

‑

sheet trays

Optional 2200

‑

sheet tray

Multipurpose feeder

Attaching cables

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

Use only the telecommunications (RJ

‑

11) cord provided with this product or a 26 AWG or larger replacement

when connecting this product to the public switched telephone network.

Warning—Potential Damage:

Do not touch the USB cable, any wireless network adapter, or the printer in the

area shown while actively printing. Loss of data or a malfunction can occur.

Learning about the printer

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands