Lexmark XC4342 User Manual Download

Page: 278 / 350

Note:

Before solving the problem, print the Print Quality Test Pages. From the home screen, touch

Settings

Troubleshooting

Print Quality Test Pages

Action

Yes

Depending on your operating system, specify the
paper type from the Printing Preferences or Print
dialog.

Notes:

•

Make sure that the setting matches the paper
loaded.

•

You can also change the setting on the printer
control panel. From the home screen, touch

Settings

Paper

Tray Conﬁguration

Paper

Size/Type

Print the document.

Does the toner rub off?

Contact

customer

support

The problem is solved.

Uneven print density

Note:

Before solving the problem, print the Print Quality Test Pages. From the home screen, touch

Settings

Troubleshooting

Print Quality Test Pages

Action

Yes

Remove the color imaging kit, and then remove the black
imaging unit.

Warning—Potential Damage:

Do not expose the color

imaging kit and black imaging unit to direct light for more
than 10 minutes. Extended exposure to light may cause print
quality problems.

Warning—Potential Damage:

Do not touch the

photoconductor drum under the color imaging kit and black
imaging unit. Doing so may affect the quality of future print
jobs.

Insert the black imaging unit, and then insert the color imaging
kit.

Print the document.

Is the print density uneven?

Contact

customer

support

The problem is
solved.

Troubleshoot a problem

278

Summary of Contents for XC4342































































































































































































































































































































































Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands

Lexmark XC4342, User Manual

Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands