Lexmark XC4342 User Manual Download

Page: 182 / 350

Menu item

Description

PCL SmartSwitch

Off

On*

Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.

Note:

When this setting is disabled, the printer does not examine

incoming data and uses the default printer language speciﬁed in
the Setup menu.

PS SmartSwitch

Off

On*

Set the printer to switch automatically to PostScript emulation when
a print job requires it, regardless of the default printer language.

Note:

When this setting is disabled, the printer does not examine

incoming data and uses the default printer language speciﬁed in
the Setup menu.

Job Buffering

Off*

Temporarily store print jobs in the hard disk or intelligent storage
drive (ISD) before printing.

Note:

This menu item appears only when a hard disk or an ISD is

installed.

Mac Binary PS

Auto*

Off

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

•

Auto processes print jobs from computers using either
Windows or Macintosh operating systems.

•

Off ﬁlters PostScript print jobs using the standard protocol.

Energy Efficient Ethernet

Off

Auto*

Reduce power consumption when the printer does not receive data
from the Ethernet network.

Note:

An asterisk (*) next to a value indicates the factory default setting.

TCP/IP

Note:

This menu appears only in network printers or printers attached to print servers.

Menu item

Description

Set Hostname

Set the current TCP/IP host name.

Domain Name

Set the domain name.

Allow DHCP/BOOTP to update
NTP server

On*

Off

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

Zero Conﬁguration Name

Specify a service name for the zero conﬁguration network.

Enable Auto IP

Off

On*

Assign an IP address automatically.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

182

Summary of Contents for XC4342































































































































































































































































































































































Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands

Lexmark XC4342, User Manual

Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands