Lexmark XC4342 User Manual Download

Page: 137 / 350

Menu item

Description

Log Action at Near Full

None*

‑

mail Current Log

‑

mail & Delete Current Log

‑

mail & Delete Oldest Log

Post Current Log

Post & Delete Current Log

Post & Delete Oldest Log

Delete Current Log

Delete Oldest Log

Delete All But Current

Delete All Logs

Specify how the printer responds when the hard disk or ISD is nearly full.

Note:

The value deﬁned in Log Near Full Level determines when this action

is triggered.

Log Action at Full

None*

‑

mail & Delete Current Log

‑

mail & Delete Oldest Log

Post & Delete Current Log

Post & Delete Oldest Log

Delete Current Log

Delete Oldest Log

Delete All But Current

Delete All Logs

Specify how the printer responds when hard disk or ISD usage reaches the
maximum limit (100MB).

URL to Post Log

Specify where the printer posts job accounting logs.

‑

mail Address to Send Logs

Specify the e

‑

mail address to which the printer sends job accounting logs.

Log File Preﬁx

Specify the preﬁx for the log ﬁles.

Note:

The current host name deﬁned in the TCP/IP menu is used as the

default log ﬁle preﬁx.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PDF

Menu item

Description

Scale To Fit

Off*

Scale the page content to ﬁt the selected paper size.

Annotations

Do Not Print*

Specify whether to print annotations in the PDF.

Print PDF Error

Off

On*

Enable the printing of PDF error.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

137

Summary of Contents for XC4342































































































































































































































































































































































Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands

Lexmark XC4342, User Manual

Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands