Lexmark XC4342 User Manual Download

Page: 118 / 350

Menu item

Description

Allow Background Removal

Off

On*

Specify whether background removal is allowed.

Allow Custom Job scans

Off

On*

Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.

Note:

This menu item appears only when a hard disk or an

intelligent storage drive is installed.

One Page Flatbed Scanning

Off*

Set the printer to scan any type of job involving the scanner
glass as a single page.

Note:

The printer returns to the home screen after

performing a single ﬂatbed scan instead of displaying
prompts.

Device Sounds

Mute All Sounds (Off*)

Button Feedback (On*)

Volume (5*)

ADF Loaded Beep (On*)

Alarm Control (Single*)

Cartridge Alarm (Single*)

Speaker Mode (On until Connected*)

Ringer Volume (On*)

Conﬁgure the sound settings of the printer.

Screen Timeout

5–300 seconds (60*)

Set the idle time in seconds before the display shows the home
screen, or before the printer logs out a user account
automatically.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Eco-Mode

Menu item

Description

Print

Sides

‑

Sided*

‑

Sided

Specify whether to print on one side or both sides of the paper.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

118

Summary of Contents for XC4342































































































































































































































































































































































Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands

Lexmark XC4342, User Manual

Search results

Summary of Contents for XC4342

Reviews:

Related manuals for XC4342

Brands by name

Popular brands