Lexmark XC4100 Series User Manual Download

Page: 119 / 158

Text or images cut off

Leading edge

Trailing edge

ABCDE
ABCDE
ABCDE

Action

Yes

Step 1

Move the paper guides in the tray to the correct position for the
paper loaded.

Resend the print job.

Is the page or image still clipped?

Go to step 2.

The problem is
solved.

Step 2

Depending on your operating system, specify the paper size
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Resend the print job.

Is the page or image still clipped?

Go to step 3.

The problem is
solved.

Step 3

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Is the page or image still clipped?

Contact

customer

support

The problem is
solved.

Troubleshooting

119

Summary of Contents for XC4100 Series































































































































































Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands

Lexmark XC4100 Series, User Manual

Search results

Summary of Contents for XC4100 Series

Reviews:

Related manuals for XC4100 Series

Brands by name

Popular brands