Lexmark XC2326 User Manual Download Page 93

Page: 93 / 254

Menu item

Description

Orientation

Portrait*

Landscape

Reverse Portrait

Reverse Landscape

Specify the orientation of text and graphics on the page.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Paper

Tray Conﬁguration

Menu item

Description

Default Source

Tray [x] (1*)

Manual Paper

Manual Envelope

Set the paper source for all print jobs.

Paper Size/Type

Tray [x] (1*)

Manual Paper

Manual Envelope

Specify the paper size or paper type loaded in each paper source.

Substitute Size

Off

Letter/A4

All Listed*

Set the printer to substitute a speciﬁed paper size if the requested size is not
loaded in any paper source.

Notes:

•

Off prompts the user to load the required paper size.

•

Letter/A4 prints an A4

‑

size document on letter when loading letter, and

letter

‑

size jobs on A4 paper size when loading A4.

•

All Listed substitutes Letter/A4.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Media Conﬁguration

Universal Setup

Menu item

Description

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note:

Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands