Lexmark XC2326 User Manual Download Page 90

Page: 90 / 254

Advanced Imaging

Menu item

Description

Color Balance

Cyan

‑

5 to 5 (0*)

Magenta

‑

5 to 5 (0*)

Yellow

‑

5 to 5 (0*)

Black

‑

5 to 5 (0*)

Reset Defaults

Adjust the amount of toner that is used for each color.

Color Correction

Color Correction

Auto*

Off

Manual

Color Correction Content

Modify the color settings used to print documents.

Notes:

•

Off sets the printer to receive the color correction from the software.

•

Auto sets the printer to apply different color proﬁles to each object on the
printed page.

•

Manual allows the customization of the RGB or CMYK color conversions
applied to each object on the printed page.

•

Color Correction Content is available only when Color Correction is set to
Manual.

Color Adjust

Calibrate the printer to adjust color variations in the printed output.

Note:

An asterisk (*) next to a value indicates the factory default setting.

PostScript

Menu item

Description

Print PS Error

Off*

Print a page that describes the PostScript

error.

Note:

When an error occurs, processing of the job stops, the printer

prints an error message, and the rest of the print job is ﬂushed.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width.

Note:

Jobs printed in 4800 CQ use half the value.

Lock PS Startup Mode

On*

Off

Disable the SysStart ﬁle.

Note:

The default setting varies depending on the printer model.

Image Smoothing

Off*

Enhance the contrast and sharpness of low

‑

resolution images.

Note:

This setting has no effect on images with a resolution of 300 dpi or

higher.

Wait Timeout

Disabled

Enabled*

Enable the printer to wait for more data before canceling a print job.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands