Lexmark XC2326, User Manual

Page: 64 / 254

E-mail
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
Note: The ADF is available only in some printer models.
•
Use the ADF for multiple
‑
page or two-sided
documents.
•
Load an original document faceup. For multiple
‑
page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
•
Use the scanner glass for single
‑
page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
Sending an e-mail
Before you begin, make sure that the SMTP settings are configured. For more information, see “Configuring
the e
‑
mail SMTP settings” on page 32 .
Using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail , and then enter the needed information.
3
If necessary, configure the output file type settings.
4
Send the e-mail.
Using a shortcut number
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Shortcuts > E
‑
mail .
3
Select the shortcut number.
4
Send the e
‑
mail.
E-mail 64