Lexmark XC2326 User Manual Download Page 56

Page: 56 / 254

Notes:

•

If you insert the ﬂash drive when an error message appears, then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

Select the document that you want to print.

If necessary, conﬁgure other print settings.

Print the document.

To print another document, select

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Supported ﬂash drives and ﬁle types

Flash drives

•

Lexar JumpDrive S70 (16GB and 32GB)

•

SanDisk Cruzer (16GB and 32GB)

•

PNY Attaché (16GB and 32GB)

Notes:

–

The printer supports high

‑

speed USB ﬂash drives with full

‑

speed standard.

–

USB ﬂash drives must support the File Allocation Table (FAT) system.

Summary of Contents for XC2326































































































































































































































































Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands

Lexmark XC2326, User Manual

Search results

Summary of Contents for XC2326

Reviews:

Related manuals for XC2326

Brands by name

Popular brands