Lexmark XC2326, User Manual

Page: 31 / 254

Connecting the printer to a non
‑
RJ
‑
11 wall jack
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to the RJ
‑
11 adapter, and then connect the adapter to the wall jack.
3
If you want to connect another device with a non
‑
RJ
‑
11 connector to the same wall jack, then connect it
directly to the telephone adapter.
Connecting to a distinctive ring service
A distinctive ring service lets you have multiple telephone numbers on one telephone line. Each telephone
number is assigned a different ring pattern.
Note: These instructions apply only to printers that support analog fax. For more information, see “Supported
fax” on page 24 .
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls >
Answer On .
2
Select a ring pattern.
Set up, install, and configure 31