Lexmark XC2326, User Manual

Page: 26 / 254

•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
“Updating firmware” on page 46 .
1
From the home screen, touch Fax .
2
Touch Set up now .
3
Type the fax name, and then touch Next .
4
Enter the fax number and then touch Done .
Using the Settings menu in the printer
1
From the home screen, touch Settings > Fax > Fax Setup > General Fax settings .
2
Configure the settings.
Using the Embedded Web Server
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Fax > Fax Setup > General Fax Settings .
3
Configure the settings.
4
Apply the changes.
Setting up the fax function using etherFAX
Notes:
•
The printer firmware must be updated to the latest version. For more information, see “Updating
firmware” on page 46 .
•
An appropriate license bundle must be installed in your printer. For more information, contact etherFAX.
•
Make sure that you have registered your printer to the etherFAX portal. For more information, go to
https://www.etherfax.net/lexmark .
•
The printer serial number is required on registration. To locate the serial number, see “Finding the printer
serial number” on page 10 .
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Settings > Fax > Fax Setup > General Fax Settings .
Note: Fax Setup appears only if Fax Mode is set to Fax.
3
In the Fax Name field, type a unique name.
Set up, install, and configure 26