Lexmark T420 Page 71 Service Manual Download

Page: 71 / 208

Diagnostic Information

2-35

4048–00x

Cold Fuser Service Check

FRU

Action

Fuser Lamp
Lamp Cable
LVPS

Unplug the printer and disconnect the
fuser lamp cable from the LVPS card
connector (CN3). See

“Power Supply

(LVPS)” on page 5-11

for more

information.

Check for continuity across the fuser
lamp. (Pins #1 and #2)

If there is continuity, go to step 1. If
there is no continuity, go to step 2.

Step 1:

Continuity

Reconnect the fuser lamp cable at
CN3.

Replug and turn the printer on.

Measure the voltage at connector CN4
on the LVPS. It should match the line
voltage.

• If line voltage is not present, replace

the LVPS.

Make sure the fuser thermistor is
correctly connected to the RIP card
(J22). If the problem persists,
disconnect the thermistor cable from
the RIP card assembly and check for
+4 V to +5 V dc. See

“Locations” on

page 5-1

for more information.

• If the voltage is incorrect, see

“RIP

Card Service Check” on
page 2-31

Step 2:

Continuity

Unplug the printer and check the lamp
cable for continuity.

• If correct, replace the lamp.
• If incorrect, replace the lamp cable.

Summary of Contents for T420

















































































































































































































Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands

Lexmark T420, Service Manual

Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands