Lexmark T420 Page 152 Service Manual Download

Page: 152 / 208

4-46

Service Manual

4048–00x

Reference Plate Assembly Removal

1. Remove the print cartridge.

2. Remove the gear train assembly. See

“Main Drive Assembly

Removal” on page 4-44

for more information.

3. Remove the three screws. Located between the main gear drive

and the assembly plate.

4. Remove the MPF cover. See

“Lower Front Cover

(Multipurpose Feeder Cover) Removal” on page 4-6

for more

information.

5. Remove the upper body MPF assembly. See

“Upper (MPF)

Housing Assembly (with Paper Flag) Removal” on
page 4-49

for more information.

6. Remove the lower body MPF assembly. See

“Lower (MPF)

Housing Assembly - Paper Sensor Removal” on page 4-50

for more information.

7. Remove one screw in the cover adjacent to the assembly plate.

Note:

– Remove the reference plate assembly through the front of

the printer

[A]

Summary of Contents for T420

















































































































































































































Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands

Lexmark T420, Service Manual

Search results

Summary of Contents for T420

Reviews:

Related manuals for T420

Brands by name

Popular brands