Lexmark Pro910 Series, Service Manual

Page: 40 / 118

3-4
Service Manual
Lexmark Pro910 Series
Go Back
Previous
Next
Format Fax Storage
This setting allows the user to format non-volatile fax storage memory.
To perform this procedure:
1.
From the Configuration Menu, navigate to Format Fax Storage .
2.
Contents will be lost. Continue?
appears. Select Yes or No .
ADF Edge Erase
This menu item sets the size, in millimeters, of the no-print area around an ADF scan job. All copy jobs have a
two-millimeter minimum border. Copy jobs will use the setting or two millimeters, whichever is larger.
To adjust this setting:
1.
From the Configuration Menu, navigate to ADF Edge Erase .
2.
Select the setting.
3.
Touch Accept to save the setting, or touch to return to the Configuration Menu without saving any
changes.
FB Edge Erase
This menu item sets the size, in millimeters, of the no print are around a flatbed scan job. All copy jobs have a
two- millimeter minimum border. Copy jobs will use the setting or two millimeters, whichever is larger
To adjust this setting:
1.
From the Configuration Menu, navigate to FB Edge Erase .
2.
Select the setting.
3.
Touch Accept to save the setting, or touch to return to the Configuration Menu without saving any
changes.
USB Speed
This setting is used to set the throughput of the USB port. The settings are Auto (default) and Full. Full forces the
USB port to run at full speed and also disables its high-speed capabilities.
To change this setting:
1.
From the Configuration Menu, navigate to USB Speed .
2.
Select Full or Auto .
3.
Touch Accept to save the setting, or touch to return to the Configuration Menu without saving any
changes.
Edge to Edge Printing
To change this setting:
1.
From the Configuration Menu, navigate to Edge to Edge Printing .
2.
Select On or Off .
3.
Touch Accept to save the setting, or touch to return to the Configuration Menu without saving any
changes.