Lexmark Pro910 Series, Service Manual

Page: 10 / 118

x
Service Manual
Lexmark Pro910 Series
Go Back
Previous
Next
Preface
This manual contains maintenance procedures for service providers. It is divided into the following chapters:
1. General information contains a general description of the printer and the maintenance approach used to repair
it. It includes printer specifications, special tools, and acronyms.
2. Diagnostic information contains an error code table, symptom tables, and service checks used to isolate
failing field replaceable units (FRUs).
3. Diagnostic aids contains tests and checks used to locate or repeat symptoms of printer problems.
4. Repair information provides instructions for making printer adjustments and removing and installing FRUs.
5. Connector locations uses illustrations to identify the connector locations and test points on the printer.
6. Preventive maintenance contains the lubrication specifications and recommendations to prevent problems.
7. Parts catalog contains illustrations and part numbers for individual FRUs.
Conventions
Note: A note provides additional information.
Warning: A warning identifies something that might damage the product hardware or software.
There are several types of caution statements:
CAUTION
A caution identifies something that might cause a servicer harm.
CAUTION
This type of caution indicates there is a danger from hazardous voltage in the area of the
product where you are working. Unplug the product before you begin, or use caution if the
product must receive power in order to perform the task.
CAUTION
This type of caution indicates a hot surface.