44
Warning displays on printer operator
panel about collation area.
I pressed “Continue” on the printer
operator panel, my copies were not in
correct sequence.
The printer does not have enough memory.
You may have to turn collation off and
manually sort your copies.
Installing additional memory helps alleviate
this problem.
Pages were not copied in the correct
order when using Paper Saver mode.
Rotate the originals a half-turn and try
again.
I set Copy Media to transparency,
but when I get A4 size copies
(transparency light goes off and the
plain paper light comes on).
The control panel uses the last button
pressed as the highest priority. The panel
“knows” that the only A4 size paper loaded
in the printer’s trays is plain paper.
The control panel does not let you select
Copy Media
and Paper Size combinations
which do not exist in the printer.
When flatbed scanning a document,
the rotation of my scanned copy is
not correct.
To increase print speeds, some printer
models feed paper in a landscape
orientation.
Place your original in the flatbed of the scan
unit in the same orientation that your printer
uses (for example, landscape instead of
portrait).
Automatic sheet feeders make this
adjustment for you, but the scan process
may take a little longer.
Problem
Solution
