36
Job 5: enlarge copies
If the scaling factor goes
beyond 125%, use the Reduce
and Enlarge buttons to change
the scaling factor.
Enlarge a black-and-white drawing so you can see it better and make
annotations.
1
Place your original in the scan unit.
2
Press Enlarge. Hold down the button to rapidly increase the scaling factor.
Experiment with the Reduce
and Enlarge buttons to get the
copy just the way you want it.
3
Release the button when 125% appears on the display.
4
Press Go/Send.
Job 6: document with color
Make copies of a one page letter-size document containing several small, color
photographs.
Photo mode is intended to be
used to copy actual
photographs or similar high
quality images.
1
Place an original page which has a photograph on it in the scan unit.
2
Press Content until the photo light is on, and then press Go to print a copy.
3
Press Content until the mixed light comes on, and then press Go to print a
second copy.
Photos printed on a printer
should be copied using mixed
mode.
4
Compare the two copies to the original, and then decide which setting
produces the best quality of the photograph. Reset Content to the best
choice (
photo
or
mixed
).
5
Enter the number of copies you want using the numeric keypad.
6
Return the page with the photograph to the scan unit, and then press Go/
Send
.
