21
Use the MarkNet resident web server (IP only)
Configuration is a task usually
performed by a network
administrator or other system
support person. If you are
prompted for a password, see
your support person for help.
After the IP address is set (using any method), use your browser to set the
required fax information.
1
Type the IP address of the MarkNet print server in the URL field of your
browser (for example, http://192.168.236.24), and then press Enter.
2
Click Configuration.
3
Under the OptraImage heading, click FAX Setup.
During printer power up the
MarkNet print server searches
your network for a Network
Time Protocol (NTP) time
server. If it finds a NTP time
server, and then the current
date and time are provided by
the time server. However, you
must set the country and time
zone to get the correct time.
4
Enter the required FCC information:
•
Date and Time
(change to current date and time)
•
Station Name
(your personal name or company name)
•
Station Number
(your fax phone number)
5
Select the Country and Time Zone, such as
USA/Can. Eastern
(USA and
Canada, Eastern Standard Time). This sets the required information.
6
Set or change any additional fax settings you want. For detailed
information about these additional settings, see “Chapter 3: Faxing” on
page 45.
7
After entering the information, click Submit.
Create a fax destination list
Instead of entering the entire phone number of a fax recipient on the control
panel each time you want to send a fax, you can create a permanent fax
destination and assign a shortcut. All you need to do to send a fax is press #,
and then enter the assigned shortcut number on the numeric keypad of the
OptraImage control panel.
A list of these shortcuts can be
viewed and printed. See “Print
the shortcut list” on page 60.
1
Click Configuration.
2
Click Manage Destinations.
3
Click FAX Destinations Setup.
4
Enter a unique name for the fax recipient and specify their fax number.
5
Assign a shortcut number (1-89). If you enter a number already in use, you
are prompted to select another number.
6
Click Submit.
