16
Attach all the cables
Use only the German TAE
type F adapter (P/N 14B5123)
shipped with this product
because it contains a billing
tone filter. The adapter is
designed only for the
F connector of the German
wall outlet. This must be the
only device attached to the
NFN wall receptacle.
Use only the Switzerland
adapter (P/N 14B5109)
shipped with this product
because it contains a billing
tone filter.
.
7
Telephone fax line cable
To send or receive faxes, you must
plug the RJ-11 telephone fax line cable
into the fax modem port of the back on
the MarkNet N2501e print server
installed in your printer.
You may have received a telephone
adapter with this product, one
specifically designed for use in your
country. Attach the telephone adapter
to the telephone fax line cable.
However, do not plug the fax telephone
cable into the wall outlet yet.
Network cable
If you want to be able to send network
print jobs to your printer, plug the
Ethernet cable into the Ethernet
network port on the back of the
MarkNet print server installed in your
printer.
SCSI cables
The SCSI cables connect your scan unit, control panel, and printer to each
other.
Important:
Hook up the SCSI cables in this step, but do not connect the
power cords or turn the power on yet
. This will be done in the
next step.
Ethernet
network cable
SCSI cable
Telephone fax
line cable (RJ-11)
