8
Prerequisites
Set up your printer
1
Follow the hardware setup instructions in the documentation that shipped
with your printer. This includes setting up all bins and trays, duplex
hardware, and any other options you may have purchased.
2
If you attach your printer to a network during printer setup, save your
network setup page because you will use the information contained on it
during the OptraImage setup.
3
When you have finished, verify the printer hardware setup by printing the
menu settings page. Instructions for printing this page are included in
your printer setup documentation.
IMPORTANT: Turn All Power Off
Before and during the OptraImage setup, all equipment should be turned off.
All power cords, fax/phone cables, and network cables should be unplugged
from their wall outlets. This includes all cords and cables attached to the PC,
printer, MarkNet print server, OptraImage control panel, scan unit, and any
other peripherals powered from a wall outlet.
Following setup, all equipment may be plugged into properly grounded or
fax/phone wall outlets and turned on.
