Lexmark Optra M410 User Manual Download Page 35

Page: 35 / 312

Changing the Operator Panel Display Language

Changing the

Operator Panel

Display Language

Complete the following steps to change the language of
the menus and messages that appear on the operator
panel display:

Press the

Menu>

<Menu

button to enter the

menus.

Continue to press and release

Menu>

<Menu

until

SETUP MENU

appears on the second line of the dis-

play.

Note:

The

Select

button acts

upon information that appears
on the second line of the opera-
tor panel display.

Press the

Select

button.

Press

Menu>

until

Display Language

appears on the

second line of the display.

Press

Select

Note:

See “Using the

Operator Panel” on page 34 to
identify the display and operator
panel buttons if you need help.

Press

Menu>

until your preferred language appears

on the second line of the display.

Press

Select

The printer resets and displays text in the requested
language.

Summary of Contents for Optra M410

























































































































































































































































































































Search results

Summary of Contents for Optra M410

Reviews:

Lexmark Optra M410, User Manual, Page: 35 / 312

Search results

Summary of Contents for Optra M410

Reviews: