Lexmark Optra M410, User Manual

Page: 114 / 312

102
Chapter 3: Using the Operator Panel and Menus
Fax Menu
Use the FAX MENU to change settings affecting fax data
received by the printer through the serial interface port on
the Tri-Port interface option card.
With the Tri-Port interface option card installed, the
printer can receive and print fax data.
If
Fax Port
is set to
Disabled
, all other menu items in the
FAX MENU are not available.
Ser Option 1 is only available if a Tri-Port interface option
card is installed in your printer. See “Tri-Port Interface
Option Card” on page 212 or “Fax” on page 197 for more
information.
Fax Menu
Menu Item Values
Fax Port Disabled*
Ser Option 1
Select Ser Option 1 to activate the serial port on the Tri-Port interface option card and
configure it to receive fax data.
If you select Disabled , all of the other menu items in the FAX MENU are not available.
Fax Baud 1200
2400
4800
9600
19200*
38400
57600
115200
This setting lets you select the rate at which fax data is being sent to or from your computer.
Refer to the
Technical Reference for information about the range of baud values.
Fax Data Bits 7
8*
This setting lets you select the number of fax data bits that are sent in each transmission
frame. Refer to the
Technical Reference for more information about data bits.
*Factory default