Lexmark Optra Color 1200, Service Manual

Page: 49 / 245

2-10
Service Manual
5050-001
Status Messages
Message Meaning
Ready The printer is ready to receive and process data.
Power Saver When your printer is in power saver mode, the Power
Saver message replaces the Ready message on the
display. When Power Saver is displayed, your printer is
ready to receive and process data.
When Power Saver is displayed, you can:
• Press Go to quick start the printer.
• Press Menu> or <Menu to enter the menus.
Engine Warming The printer is warming the fuser to prepare for printing.
Performing Self Test The printer is running the normal series of start-up
tests it performs after it is turned on.
Busy The printer is processing or printing data. (The light on
the operator panel flashes while this message is
displayed.) If a job name has been defined, the name
replaces the Busy message on the display.
To cancel the print job, press
Menu>
or
<Menu
. The
Job Menu is displayed. Press
Menu>
or
<Menu
until
Cancel Job appears on the second line. Press
Select
.
Waiting The printer has received a page of data to print but is
waiting for an End of Job or Form Feed command or
for additional data.
• To print the contents of the print buffer, press Go.
• To cancel the print job, press Menu> or <Menu . The
Job Menu is displayed. Press Menu> or <Menu until
Cancel Job appears on the second line. Press
Select .
Not Ready The printer is not ready to receive or process data,
because someone selected
Stop
when another
message was displayed.
• Press
Go
to take the printer out of the Not Ready
state.
• To cancel the print job, press
Menu>
or
<Menu
. The
Job Menu is displayed. Press
Menu>
or
<Menu
until
Cancel Job appears on the second line. Press
Select
.