![Lexmark Optra Color 1200 Service Manual Download Page 124](http://html1.mh-extra.com/html/lexmark/optra-color-1200/optra-color-1200_service-manual_1889576124.webp)
4-10
Service Manual
5050-001
Removal Procedures
LED Head Removal
Open the top cover and remove the toner cartridge and PC drum. Be
sure to set them away from bright light.
1. Remove the left and right head covers.
2. Remove the left and right pressure bases, (3 black screws). Be
careful of the LED head because nothing is supporting it at this
time.
3. Remove the black right-hand head spring and the gold left-hand
head spring.
4. Disconnect the ground wire and the flat cable on both ends of
the head from the connector.
5. Remove the LED head. Do not remove or loosen the pins on
either end of the LED head because the head will be out of
focus when you reinstall it. Set the head aside and place a
sheet of paper over the transfer belt to protect it.
6. Do the print position (top margin K and C) adjustments for each
paper supply tray and enter the LED head quantity in the
service mode. When you replace the head also replace the
EEPROM on the printhead controller board which corresponds
to the head.
Summary of Contents for Optra Color 1200
