Lexmark MX910 Series, User Manual

Page: 85 / 363

Creating an e-mail shortcut
Notes:
•
Make sure that E-mail Shortcuts is set to Display. From the home screen, touch > Settings > General
Settings > Home screen customization > E-mail Shortcuts > Display > Submit .
• To delete an e-mail shortcut, touch > Manage Shortcuts > E
‑
mail Shortcuts > the shortcut to delete >
Delete Entry > Delete now .
Creating an e-mail shortcut using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings .
3
From the Other Settings column, click Manage Shortcuts > E-mail Shortcut Setup .
4
Type a unique name for the e
‑
mail recipient, and then type the e
‑
mail address. If you are entering multiple addresses,
then separate each address with a comma.
5
Click Add .
Creating an e-mail shortcut using the control panel
1
From the home screen, navigate to:
MyShortcut > Create > E
‑
mail
2
Type a unique shortcut name, and then touch Done .
3
Configure the e
‑
mail settings, and then touch Done .
4
Touch E
‑
mail Shortcuts on the home screen to verify the shortcut.
E-mailing a document
Sending an e-mail using the control panel
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch E-mail , and then enter the information needed.
3
Configure and then save the output file type settings.
4
Touch Send It .
E-mailing 85