Lexmark MX910 Series, User Manual

Page: 141 / 363

Use To
Use SSL
Disabled
Negotiate
Required
Set the printer to use SSL for increased security when connecting to the
SMTP server.
Notes:
• Disabled is the factory default setting.
•
When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
SMTP Server Authentication
No authentication required
Login/Plain
CRAM
‑
MD5
Digest
‑
MD5
NTLM
Kerberos 5
Specify the type of user authentication required for scan
‑
to e
‑
mail
privileges.
Note: “No authentication required” is the factory default setting.
Device
‑
Initiated E
‑
mail
None
Use Device SMTP Credentials
Specify what credentials will be used when communicating to the SMTP
server. Some SMTP servers require credentials to send an e-mail.
Notes:
•
None is the factory default setting for Device
‑
Initiated E
‑
mail and
User
‑
Initiated E
‑
mail.
• Device Userid and Device Password are used to log in to the SMTP
server when Use Device SMTP Credentials is selected.
User
‑
Initiated E
‑
mail
*
None
Use Device SMTP Credentials
Use Session User ID & Password
Use Session E
‑
mail address & Password
Prompt User
Device Userid
Device Password
Kerberos 5 Realm
NTLM Domain
Security menu
Edit Security Setups menu
Use To
Edit Backup Password
Use Backup Password
Off
On
Password
Create a backup password.
Notes:
• Off is the factory default setting for Use Backup Password.
•
This menu item appears only if a backup password exists.
Understanding the printer menus 141