Lexmark MX-C357F User Manual Download Page 189

Page: 189 / 208

Action

Yes

Step 2

Check the quality of the original document or photo.

Adjust the scan quality settings.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Contact your

dealer

Scan job was not successful

Action

Yes

Step 1

Check the cable connections.

Make sure that the Ethernet or USB cable is securely connected
to the computer and the printer.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Go to step 2.

Step 2

Check the ﬁle that you want to scan.

Make sure that the ﬁle name is not already used in the
destination folder.

Make sure that the document or photo you want to scan is not
open in another application.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Go to step 3.

Step 3

Make sure that the Append time stamp or the Overwrite
existing ﬁle check box is selected in the destination
conﬁguration settings.

Resend the scan job.

Is the scan job successful?

The problem is
solved.

Scanner does not close

Action

Yes

Remove obstructions that keep the scanner unit open.

Did the scanner unit close correctly?

The problem is
solved.

Contact your

dealer

Troubleshooting

189

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands