Lexmark MX-C357F User Manual Download Page 186

Page: 186 / 208

Action

Yes

Step 7

Scan the original document one page at a time.

Dial the fax number.

Scan the document.

Can you send or receive a fax?

The problem is
solved.

Contact your

dealer

Can receive but not send faxes

Action

Yes

Step 1

Load the original document properly into the ADF tray or on the
scanner glass.

Can you send faxes?

The problem is
solved.

Go to step 2.

Step 2

Set up the shortcut number properly.

•

Check if the shortcut number is set for the telephone number
that you want to dial.

•

Dial the telephone number manually.

Can you send faxes?

The problem is
solved.

Contact your

dealer

Can send but not receive faxes

Action

Yes

Step 1

Make sure that the paper source is not empty.

Can you receive faxes?

The problem is
solved.

Go to step 2.

Step 2

Check the ring count delay settings.

From the control panel, navigate to

Settings

Fax

Fax Setup

Fax Receive Settings

Rings to Answer

For non-touch-screen printer models, press

to navigate

through the settings.

Can you receive faxes?

The problem is
solved.

Go to step 3.

Troubleshooting

186

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Related manuals for MX-C357F

Brands by name

Popular brands