Lexmark MX-C357F User Manual Download Page 164

Page: 164 / 208

Gray or colored background

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Perform Color Adjust.

From the control panel, navigate to:

Settings

Print

Quality

Advanced Imaging

Color Adjust

Print the document.

Does gray or colored background appear on prints?

Contact your

dealer

. The problem is

solved.

Incorrect margins

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non-touch-screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Adjust the paper guides to the correct position for the paper
loaded.

Print the document.

Are the margins correct?

The problem is
solved.

Go to step 2.

Troubleshooting

164

Summary of Contents for MX-C357F

















































































































































































































Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands

Lexmark MX-C357F, User Manual

Search results

Summary of Contents for MX-C357F

Reviews:

Brands by name

Popular brands