Lexmark MX-B557P User Manual Download Page 64

Page: 64 / 217

Menu item

Description

Font Size

1–255 (12*)

Set the font size to use when printing HTML documents.

Scale

1–400% (100*)

Scale HTML documents for printing.

Orientation

Portrait*

Landscape

Set the page orientation for HTML documents.

Margin Size

8–255 mm (19*)

Set the page margin for HTML documents.

Backgrounds

Do Not Print

Print*

Print background information or graphics in HTML documents.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Image

Menu item

Description

Auto Fit

Off*

Select the best available paper size and orientation setting for an image.

Note:

When set to On, this menu item overrides the scaling and orientation

settings for the image.

Invert

Off*

Invert bitonal monochrome images.

Note:

This menu item does not apply to GIF or JPEG image formats.

Scaling

Anchor Top Left

Best Fit*

Anchor Center

Fit Height/Width

Fit Height

Fit Width

Adjust the image to ﬁt the printable area.

Note:

When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Orientation

Portrait*

Landscape

Reverse Portrait

Reverse Landscape

Specify the orientation of text and graphics on the page.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands