Lexmark MX-B557P User Manual Download Page 39

Page: 39 / 217

•

Tap

Print

Select a printer, and then adjust the settings, if necessary.

Print the document.

Printing from a ﬂash drive

Insert the ﬂash drive.

Notes:

•

If you insert the ﬂash drive when an error message appears, then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears on the

display.

Select the document that you want to print.

If necessary, conﬁgure other print settings.

Print the document.

To print another document, select

USB Drive

Warning—Potential Damage:

To avoid loss of data or printer malfunction, do not touch the ﬂash drive or

the printer in the area shown while actively printing, reading, or writing from the memory device.

Printing

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands