Lexmark MX-B557P User Manual Download Page 173

Page: 173 / 217

Action

Yes

Step 2

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

. For non

‑

touch

‑

screen printer models,

press

to navigate through the settings.

Print the document.

Is the paper curled?

Go to step 3.

The problem is
solved.

Step 3

Print on the other side of the paper.

Remove paper, ﬂip it over, and then reload paper.

Print the document.

Is the paper curled?

Go to step 4.

The problem is
solved.

Step 4

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the paper curled?

Contact your

dealer

. The problem is

solved.

Tray linking does not work

Action

Yes

Step 1

Check if the trays contain the same paper size and paper type.

Check if the paper guides are positioned correctly.

Print the document.

Do the trays link correctly?

The problem is
solved.

Go to step 2.

Troubleshooting

173

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands