Lexmark MX-B557P User Manual Download Page 170

Page: 170 / 217

Action

Yes

Step 7

Access the Embedded Web Server.

Did the Embedded Web Server open?

The problem is
solved.

Contact your

dealer

Checking the printer connectivity

Print the Network Setup Page.

From the control panel, navigate to:

Settings

Reports

Network

Network Setup Page

For non-touch-screen printer models, press

to navigate through the settings.

Check the ﬁrst section of the page and conﬁrm that the status is connected.

If the status is not connected, then the LAN drop may be inactive or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.

Hardware options problems

Defective ﬂash detected

Contact your

dealer

Not enough free space in ﬂash memory for resources

Contact your

dealer

Unformatted ﬂash detected

Try one or more of the following:

•

From the control panel, select

Continue

to stop the defragmentation and continue printing.

•

Format the ﬂash memory.

Note:

If the error message remains, then the ﬂash memory may be defective and needs to be

replaced. To replace the ﬂash memory, contact your

dealer

Issues with supplies

Replace cartridge, printer region mismatch

Install the correct toner cartridge.

Troubleshooting

170

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands