Lexmark MX-B557P User Manual Download Page 166

Page: 166 / 217

Conﬁdential and other held documents do not print

Action

Yes

Step 1

From the control panel, check if the documents appear in the
Held Jobs list.

Note:

If the documents are not listed, then print the

documents using the Print and Hold options.

Print the documents.

Are the documents printed?

The problem is
solved.

Go to step 2.

Step 2

The print job may contain a formatting error or invalid data.

•

Delete the print job, and then send it again.

•

For PDF ﬁles, generate a new ﬁle, and then print the
documents.

Are the documents printed?

The problem is
solved.

Go to step 3.

Step 3

If you are printing from the Internet, then the printer may be reading
the multiple job titles as duplicates.

Open the Printing Preferences dialog.

From the Print and Hold tab, click

Use Print and Hold

, and then

click

Keep duplicate documents

From the Conﬁdential Print section, enter a PIN.

Print the documents.

Are the documents printed?

The problem is
solved.

Go to step 4.

Step 4

Delete some held jobs to free up printer memory.

Print the documents.

Are the documents printed?

The problem is
solved.

Contact your

dealer

Troubleshooting

166

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands